DVD-ROM disc maintenance tips

In recent years, with the CD-ROM gradually from the historical stage, DVD-ROM prices continue to drop, DVD-ROM has been increasingly subject to all sectors of the users. But most of the DVD lovers, the DVD player in the long process of bringing the DVD-ROM wear and aging of Bald is a problem can not be ignored, a year ago I replaced my Jaws 48x CD -ROM, spend pioneer sucker 121sa, even when the pioneer to today's DVD-ROM is still no less outstanding. It then following some of my DVD-ROM on maintenance experience and share.

Hardware Posts:

1, less reading bad discs. Although the DVD-ROM enhanced error correction capability is not small, but we also know that poor quality of pirated optical discs, will inevitably lead to laser read head to read data from repeated several times, thus increasing the spindle motor and the laser head load, significantly reducing the drive's life. There is the time to read these bad disc motor is rotating at full speed, high-speed rotation of the motors that keep not only sound great, and we heard the noise too painful. So I suggest you buy a better quality disc, disc on which d less better.

2, the drive must be at work to avoid vibration. Although the DVD-ROM also features anti-vibration, but in its reading when the DVD is also very high, about powerful impact not only on the disc may be scratched, and more is on the DVD body collision. And a collision, DVD discs will not achieve the specific result of the collision speed. Motor speed immediately Fadong again to achieve a specific speed, the motor in the constant stop it immediately started working the case under the state motor life will be more than a little of.

3, using the finished DVD disc out immediately after. Although times have read the disks in the drive automatically when not in use after the deceleration, but we know that as long as there are CD-ROM drive, optical drive, it would be ready to do battle in tight, and when the computer starts and open "My Computer", when CD-ROM drive will automatically go to the search, so not only to extend the start time, but also increased the bald unnecessary to read. One may say little to do once or twice, but if often the case, the internal drive spindle motor and mechanical drive equipment is always worn state, to shorten the drive virtually the life of a thousand miles is the so-called wall, destroyed nest This senseless loss can be avoided entirely, as long as users remember after use disc can be readily removed.

4, a DVD with proper rest. We all know the bald life is limited, we were crazy to use him, and torture, then it will speed up the shortening of his life, so be sure to use CD-ROM drive, then please note the time interval, it should have sufficient rest time.

Software articles:

In the age of many of our friends, drive to use the virtual drive to help us drive decompression, such as clone cd + daemo tools is a good choice, but frequently face plate on the 4.7g of the dvd player, how our developers did not think to develop it? to clone dvd dvd headed by moving the virtual tool now springing up like the emitted, but a tool for virtual drive hundreds of times before I can make things right for everyone to see.

I tell you today that the software is DVDIDIE PRO. It uses the Smart Read-Ahead technology to advance in DVD disc data storage to the hard drive in order to reduce the workload of DVD-ROM, DVD-ROM can increase the life of the original 2 times to 8 times, the installation is simple way NEXT to engage do.

But here would like to remind you, now out of DVDIDIE PRO version does not even have a small crack in Chinese version, but according to the author using the term, a lot of break in English, Chinese version crack when in use there is no small problem, I will be mentioned below. I use the following version is DVDIDIE PRO2.18 It is a relatively old but very easy to use.

Good start to introduce the following about the function first, we see the main interface,''General "option, here we can set the necessary software support for DVD drives, and it automatically at boot time to run other options, these settings are relatively simple .

In the next "CACHE" The design set is the focus we are introducing today.

"Enable" option. DVD Cache feature is turned on, here we are, of course choose Open. After you open the can on the following to operate the.

Here we can choose to set the cache to be the type, if we choose "Recommended" If this option is the automatic configuration by the system, otherwise you can manually configure cancel. Oh, I believe everyone here will not pick out the system to adjust its own right, or else the main features of this software can give you spoil a :-) in order to win the best results, we choose to manually configure.

We abolish the system automatically configured, there will use the memory (RAM-BASED CACHE) or use as a cache disk space (DISK-BASED CACHE) as a cache option. Although the use of memory as a cache can improve the speed, but we usually are usually less user memory space, so here choose to use hard disk space as a buffer space. In the hard setting (Cache Drive) on, we do not use the partition where the operating system loads the cache, and large capacity as possible to choose the space partition, we'd better choose the district to ensure the remaining space in the 5-9G more about a D5 or D9 disc capacity of it, then we in the (Cache size) and then we can select the custom plate type according to their capacity to fill the size, now I mostly be D5, then fill 5000m, about a Zhang disc capacity, in fact, larger cache space, DVD-ROM playback video in the frequency of the process of its reading less, so naturally greatly extend the life of DVD-ROM.

Daily papers:

That we use in the DVD and CD should not overlook the need for before and after cleaning. Is usually short, pay attention to the storage and cleaning of each disc, the disc when not in use are stored in folders or CD boxes, the benefits of doing so one classification to facilitate information management, so as not to use the time could not find, on the other hand is to avoid dust, dirt and other pollution, prevention is better than cure is the so-called Well. We all know that DVD's internal use of very sophisticated optical components, are most afraid of is dust, hair and other debris pollution. So, if you want to love the DVD longevity, the best source of pollution from the source block. Of course, computer peripherals should also keep the environment clean and dry. As far as possible to the dvd it a clean environment.

Now the end of the summer to pull back many of my friends want to buy a DVD-ROM DVD back to school a dream round, had about addiction, then in dreams while we do not ecstatic desperate to buy a new DVD by make torture :-)

DVD now has become our daily life and work of the most common optical storage devices. Note that what we in ordinary usage, and pay attention to daily maintenance, then a DVD of the service period will be extended naturally many.








Recommended links:



Win 7 random and changed ANTI-PIRACY measures become soft black



Infomation Timers And Time Synch



"Sacred 2 Fallen Angel" mission concert details



convert Mkv to ps3



New E-Commerce



M4a converter



PRINT function



Audio Video Tools Directory



Kaspersky: Alert, "Fantasy Westward Journey" Daohao Trojan Havoc



New Office Suites And Tools



Windows 7 Rmvb



Two Errors in the exchange of links



Zhang Feng: NAS Really How It?



"Deceiving" or "enlightened Approach"



Convert wmv to mp4 free



Flex open source framework summary